Connect your PC to CycleOps VirtualTraining.
The Rokform PRO-LITE iPhone and Galaxy Bike mount keeps you connected as you ride. PRO-LITE is slim, low profile, lightweight and mounts solid in minutes with just a single anodized aluminum screw. Track your ride, view text messages, answer calls and more with ease. - Install in minutes to 1/18" steer tubes with a strong anodized aluminum bolt - Secure fit, Aircraft grade aluminum, twist lock and magnetic locking keeps your phone secure - Low profile and ultralight, sleek look with less drag for better aerodynamics. - Adjustable height, two 5mm spacers are included for a precise fit on almost any bike - Lifetime warranty - Designed in California
The Rokform PRO-LITE Bike Mount keeps you connected as you ride. PRO-LITE is slim, low profile, lightweight and mounts solid in minutes with just a single anodized aluminum screw. Track your ride, view text messages, answer calls and more with ease. - Easy Installation: Install in minutes to 1/18" steer tubes with a strong anodized aluminum bolt - Secure Fit: Aircraft grade aluminum, twist lock and magnetic locking keeps your phone secure - Low Profile and Ultralight: Sleek look with less drag for better aerodynamics. - Adjustable Height: 2x 5mm spacers are included for a precise fit on almost any bike. - Lifetime warranty - Designed in California
Let Rokform keep your Samsung Galaxy safe, secure, and visible while you ride. The Rokform V.3 is more than just a protective case, it's part of a complete system of protection. Made from reinforced polycarbonate, the V.3 is tough enough for your active lifestyle. Rokform's unique mounting lock is integrated into the case itself for quick, rock solid attachment to the included handlebar mount. The lever lock handlebar mount snaps easily to your bars for a fast and effective hands-free setup that keeps your phone visible and accessible. Samsung Galaxy S3 Bike Handlebar Mount & V.3 Case includes: • Samsung Galaxy S3 Bike Handlebar Mount • Samsung Galaxy S3 V.3 Mountable and Protective Case • Removable high-tensile wrist lanyard
- Superlight computer/light mount fits cleanly underneath the stem - Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer - 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm
The Miniac Double Wireless cycling computer measures important points of data for riders who want to monitor both their speed and cadence simultaneously. 14-functions give rich information on rides and a strong digital signal ensures interference-free data-flow. - Digital wireless performance that ensures strong data transfer to the head unit - Functions: Current Speed, Speed Comparison, Average Speed, Maximum Speed, Trip Time, Trip Distance, Average Cadence, Trip Cadence, Odometer, Clock, Temperature, Calorie Count - Two-button operation - Large, easy to read, display with backlight - IPX4 water resistant
Instant bike dashboard Securely hold any phone with any case. Easily mounts on stem (cap or neck) or handlebar to access maps and apps while riding. Features - Secure: Weatherproof bungee and patented cam lock - Compatibility: Works with all phones and cases (including OtterBox and LifeProof cases). Sliding system allows for instant in/out on the go - Construction: Precision molded thermoplastic - Quick Assembly: Handlebar and stem mounts included. Secures to handlebar diameters up to 1 3/8-inch/35 mm - Versatile: Includes additional ElastoMount to connect to any bar and for quick on/off - Weight: 0.24 lbs / 110 grams
- For use with trainers and spin bikes only - Holds iPad Mini, Kindle Fire, Nexus 7, Samsung Galaxy 7 - Includes touch screen friendly splash-proof bag - Universal clamp attaches to all round bars up to 1.5" diameter - Viewing perspective can be set for preference - landscape or portrait - Instant removal and installation of device - Neat rubber bumpers grip and help cushion device - Mini-Tablet Holder max dimensions: - Holds devices with max dims 8.6" x 5.5" x .625" | 220 x 140 x 15mm (H x W x D)
Universal Fit The XL Smartphone Holder is designed to securely hold iPhone 6 Plus, 6s Plus, Android Devices, and most larger style smartphones with protective cases. Compatible with devices/cases up to: 7.8 x 3.5 x 0.5 inches (H x W x D) Easy, Instant Removal Don't waste time prying your smartphone out of bulky holders or changing between cycling-specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Positioning On Your Terms Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. Weather Protection Bag (Included) Protect your device from rain, sweat, etc.. with the included waterproof baggy. Touchscreen is still accessible while your smartphone is in the bag. Securing Cam Lock The securing cam lock adds additional security to your device during those extra bumpy moments.
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
Connect your desktop to CycleOps VirtualTraining.
Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors
Train smarter by connecting heart and smart phone or computer, all from a comfortable wearable with an easy-on washable strap. Key features: - Washable heart rate strap comfortably conforms to body - ANT+ 2.4 GHz and Bluetooth Smart wireless digital heart rate sensor - ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone - For use with all ANT+ and Bluetooth Smart wireless technology enabled devices - Includes washable softstrap, heart rate sensor, and CR2032 battery - Visit thisisant.com for a complete list of compatible devices - Visit bluetooth.com for a complete list of compatible devices - Not for underwater use
$3.99 - $5.99
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes
Keep an eye on your speed, distance and more with wireless ease when Bontrager's GOTime cycling computer is clipped to your bars. Set-up is a breeze; the large LCD screen is easy to read and the integrated clip mount allows you to instantly remove the computer and throw it in your pocket when you reach your destination.
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices
Bontrager's Interchange ANT+ Cadence Sensor is a cadence sensor that wirelessly transmits your data to a variety of ANT+ enabled receiving devices including Bontrager Node computers (sold separately). It includes a 5mm crank cadence band magnet and a silicone mounting strap to fit most chainstays, making installation a snap.
Quickly and easily swap your Bontrager or Trek cycling computers and wireless sensors between bicycles without tools with these silicone mounting straps. Large and small sizes ensure proper fit on most forks. • Designed for Bontrager and Trek analog wireless computers • Interchange analog wireless sensor installs and removes in seconds without tools • Interchange sensor includes both L and S silicone mounting straps to fit most forks • Batteries can be found in computer accessories
A simple, user-friendly cycling computer that displays speed, distance, and even calories burned. The Bontrager RIDEtime Computer gives you the ride metrics that matter most in a sleek, user-friendly package. A large, easy-to-read screen makes it simple to track your speed, time, and distance, and more! Product details - Intuitive one-button control with hands-free scroll mode - 2" screen size with easy-to-read digital display - Trek Certified Service reminders based on selected bicycle type - Key features include speed (current, avg., max.), distance (trip, total), time (clock, timer), and calories burned - Sensor includes magnet guidelines to simplify setup and installation - Includes mount, analog sensor, CR 2032 battery, and wheel speed magnet
An elegant ANT+ cycling computer that’s simple to set up, intuitive to operate, and has a large, easy-to-read screen. Know your ride Change the way you ride with the RIDEtime Elite Cycling Computer. It's easy to pair with compatible ANT+ sensors for real-time speed, cadence, and power data so you can target more productive workouts and better recovery rides. Simple setup and an intuitive one-button interface get you riding faster, while features such as auto start/stop and auto light control help you take charge of your ride. Product details - 2” easy-to-read screen features a programmable backlight and customizable tri-field display - Features auto start/stop, auto clear, and auto light control with customizable hands-free scan modes - Tri-field display lets you see three functions at once (speed, cadence, heart rate, power) - Displays Trek Certified Service reminders based on your selected bicycle type - Displays distance (trip/total), time (clock, timer), and calories burned - Track your speed, heart rate, power, cadence (current, average, max) - Includes sleek out-front mount and is also Blendr compatible - Requires ANT+ compatible sensor such as DuoTrap S or Interchange Combo Sensor - Battery: CR2032 (Coin) - Weight: 40g
An elegant ANT+ cycling computer and sensor combo that’s simple to set up and intuitive to operate. Simple to set up, easy to use RIDEtime Elite Cycling Computer with DuoTrap S feeds you the metrics you need to rock every ride. The included DuoTrap S ANT+ sensor offers real-time speed and cadence so you can target more productive workouts and better recovery rides. Simple setup and an intuitive one-button interface get you riding faster, while features such as auto start/stop and auto light control help you take charge of your ride. Product details - 2” easy-to-read screen features a programmable backlight and customizable tri-field display - Features auto start/stop, auto clear, and auto light control with customizable hands-free scan modes - Tri-field display lets you see three functions at once (speed, cadence, heart rate, power) - Displays Trek Certified Service reminders based on your selected bicycle type - Displays distance (trip/total), time (clock, timer), and calories burned - Track your speed, heart rate, power, cadence (current, average, max) - Includes sleek out-front mount and is also Blendr compatible - Includes DuoTrap S sensor for clean integration into compatible Trek frames - Battery: CR2032 (Coin) - Weight: 40g
- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet
Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
With aerobars, short stems and hydration systems crowding the front end of your bike, it's hard to mount a computer. But, with Xlab's Aero Computer Mount Gen 2 you can mount your computer to your stem cap! It's aero because it fits neatly behind aero drink systems and horizontally mounted bottles, and the extra height of the mount makes your computer easier to read. It can also be mounted on the Xlab Torpedo Mini Mount, placing your computer in front in your line of sight. • The Aero Computer Mount, re-designed! Aerodynamically designed and longer to support larger screen computers • Mount in front of Torpedo Systems or on stem bolt • Helps reduce drag from a computer mount with one that was designed with aerodynamics in mind • Mount in front of TORPEDO SYSTEM (sold separately) for optimum viewing. • Mount on stem when using non-XLAB drink systems (sold separately) • Easy to read when in aero position • Fits most computers including the new longer form factor models (sold separately) • Mount is 37 mm wide. Plenty of room to support the popular Garmin computers (sold separately) • Includes hardware and instructions • Weight: 29.5 grams
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)
Page 1 of 6 Next page