Filter By:
- 24-Inch & Smaller (6)
- 26-Inch (8)
- 650B (26)
- 29-Inch (26)
- 700c, 27-Inch & 650c (44)
- Fat Bike (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels
$204.95
$324.95
37% Off
Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down.
- 30mm inner rim width with 32 spokes laced in a 3-cross pattern
- 6069 aluminum alloy rim is TCS 2.0 tubeless-ready
- Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze.
- Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke.
- 6-bolt rotor mounts
- Top-tier EZO sealed bearings
$89.99
The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system.
- Axle: 14mm chromoly (heat-treated)
- Driver: 1-pc chromoly RHD or LHD
- Driver bearings: 6802 (x2), verify bearing number on side of rubber seal
- Driver pawls: 3 Pawl
- Driver spring: Wraparound (x1)
- Hardware: Steel (17mm wheel nuts)
- Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal
- Drilling: 36H
- Weight: 45.4-ounces
$149.99
The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system.
- Axle: 14mm chromoly (heat-treated)
- Driver: 1-pc chromoly RHD or LHD
- Hardware: Steel(17mm wheel nuts)
- Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal
- Drilling: 36H
- Weight: 46.4-ounces
$89.99 - $149.99
The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim.
- Includes Stolen PVC rim strip
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 20"
- ISO Diameter: 406 / 20" BMX
- Valve: Schrader
- Tire Type: Clincher
- Rear Axle: 14mm Threaded x 110mm
- Driver: 1-pc chromoly RHD or LHD
- Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal
- Driver Pawls: 3 Pawl
- Driver Spring: Wraparound (x1)
- Hardware: Steel (17mm wheel nuts)
- Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal
- Spokes: 183mm (3X) Black w/Black Brass nipples
- Drilling: 36h only
- Weight: 45.4 oz
$201.00 - $278.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles.
With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use.
“The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.”
Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch.
All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost.
The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes.
Flow S1 Wheelset
- Use: Aggressive Trail, All Mountain, Enduro, and Downhill
- Internal Rim Width: 29mm
- Optimal Tires Size: 2.35 to 2.8-inch
- Hubs: Stan’s Neo 32-hole Front, 32-hole Rear
- Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples
- Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)
$308.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$657.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$657.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$308.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$1,154.00
- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims
- Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger
- Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel
- M-pulse hubs
- 250lb Recommended Maximum Rider Weight
$345.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits
- Tie beam triple-cavity rim design resists damage and prevents air loss under impacts
- 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires
- E-sync hubs
$475.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits
- Tie beam triple-cavity rim design resists damage and prevents air loss under impacts
- 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires
- E-sync hubs
Specs:
- Hub Model: E-SYNC
- Freehub Body: Shimano HG
- Wheel Tire Type: Tubeless Ready
- Wheel-Brake Comp.: Disc IS 6-bolt
- Rim Material: Aluminum
- Spoke Type: Sapim D-Light
- Valve: Presta
- Rim Construction: Double wall
$475.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits
- Tie beam triple-cavity rim design resists damage and prevents air loss under impacts
- 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires
- E-sync hubs
Specs:
- Wheel Tire Type: Tubeless Ready
- Wheel-Brake Comp.: Disc IS 6-bolt
- Rim Material: Aluminum
- Spoke Type: Sapim D-Light
- Valve: Presta
- Rim Construction: Double wall
$308.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- Durable 6069 aluminum with welded joint and reinforced spoke bed
- BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build
- Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.
$657.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- Durable 6069 aluminum with welded joint and reinforced spoke bed
- BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build
- Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.
$657.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- Durable 6069 aluminum with welded joint and reinforced spoke bed
- BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build
- Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.
$48.49
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Front Axle: 3/8-inch x 100mm
- Valve: Schrader
- Tire Type: Clincher
$95.49
Sta-Tru Double Wall Front Wheels.
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 26-inch x 1 3/8
- ISO Diameter: 590 / 26 x 1 3/8-inch
- Front Axle: 3/8-inch x 100mm
- Valve: Schrader
- Tire Type: Clincher
$77.49
- STW ST1 26.5mm wide alloy rims
- KT QR ATB 9mm/100/108 axle
- Black or Silver UCP spokes
$104.99 - $110.99
Sta-Tru Double Wall Rear Wheels
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 700c
- Cassette Body Type: Threaded Standard 1.37" x 24tpi
- ISO Diameter: 622 / road / 29"
- Valve: Schrader
- Tire Type: Clincher
$599.00
New WCS hubs using a ratchet system freehub.
- 24.8mm inner width rim with a 19.1mm height
- DT Swiss Competition double butted spokes
- 1840g with the included TLR rim tape
$2,199.00
Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction.
- Designed for XC riding and racing
- Carbon fiber construction with 2.8mm asymmetric offset
- Step-in internal rim bed to ease tubeless installation
- Lower profile for added lateral stiffness with increased vertical compliance
- Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels
- Backed by Santa Cruz lifetime warranty
$1,599.00
Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction.
- Designed for XC riding and racing
- Carbon fiber construction with 2.8mm asymmetric offset
- Step-in internal rim bed to ease tubeless installation
- Lower profile for added lateral stiffness with increased vertical compliance
- Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels
- Backed by Santa Cruz lifetime warranty
$2,199.00
Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile.
- Designed for DH riding and racing
- Carbon fiber construction with 4mm asymmetric offset
- Reinforced rim bed for impact resistance
- Rated for e-bike use
- Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels
- Backed by a lifetime warranty
$2,199.00
Let’s face it, modern downhill tracks are not for the faint of heart. From the moment you drop in, it’s a hari cari mix of boulders, roots, bumps and jumps awaiting you, and literally the only thing keeping you upright and connecting you to the ground is your wheels. It’s serious business, and the abuse of a day riding DH is no joke, but the Reserve 31 DH wheels have your back.
- Designed for DH riding and racing
- Carbon fiber construction with 5mm asymmetric offset
- Reinforced rim bed for impact resistance
- Rated for e-bike use
- Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels
- Backed by a lifetime warranty
$349.00
No introduction necessary for this perfect blend of DT Swiss alloy road rim and the legendary DT Swiss 350 hub. Whether you have a pro level bike and need a reliable training set or an entry to mid-level bike and need to upgrade to true performance, look no further.
- Full DT Swiss Build
- Butted Stainless Spokes
- Professional tubeless tape installation included
- 24 Hole
- DT Swiss 350 Hubs
$79.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
$229.00
Centerlock hubs on tubeless-ready rims. Includes convertible endcaps for Quick-release and Thru-Axle