Parts

Original equipment replacement seatpost clamps. - See spec chart for available diameters and compatibility - For specific compatibility concerns, please contact our Customer Service team

Replacement levers for Trek kids' bikes. Genuine replacement parts Replace your worn or damaged brake levers for proper braking operation. - Sized for smaller hands - Two-finger lever operation

Platform pedals with a durable nylon design and replaceable pins for consistent grip. - Durable nylon body with a proven shape for comfort and confidence - Virtual concave design with pin placement secures your shoe for pedaling and descending - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with 8mm hex wrench

For over two decades, Terry has worked with all levels of riders and addressed all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. One of the best values you can buy in an Italian-made saddle, the Butterfly Cromoly is also one of the most popular saddles in the Terry line. Wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails that allow us to save a few euro and make this variation a great deal. - Length x width: 262mm x 155mm - Weight: 326g / 11.5oz - Rails: FeC alloy - Cover/features: smooth Dura-tek with printed accents - Made in Italy

With thousands on the road, the Terry Liberator has earned its reputation as one of the most comfortable saddles for men. We recommend it to those experiencing a variety of comfort issues and are pleased to introduce a lighter, sleeker new Liberator Y Gel Italia, handmade in Italy. It uses the same unique soft-tissue friendly shape and high quality materials as the Liberator Y Italia, with the addition of a thin layer of gel padding along the top to add one more level of relief. Lengthy rides or touring where body position is slightly more upright requires saddle that's anatomically supportive and has a higher degree of comfort. We designed the Liberators with a wider rear for support of sit bones, a large cutaway through the center and a relief channel off the back for pressure relief against the perineal area and some much needed air flow down below. The combination of the ergonomically shaped rear paneling and durable Dura-tek cover reduces contact with stitching and creates a soft landing pad that prevents chafing. - black Dura-tek cover with black stitching - thin gel layer along top of saddle provides an additional level of comfort - enter cutaway with rear relief channel reduces contact points with soft tissue areas - length x width: 265mm x 172mm - weight: 366g - rails: FeC Alloy handmade in Italy

TRP Disc Brake Pads - Semi-Metallic, Steel Backed, For Hylex, Hylex RS, and HD-T190 Flat-Mount Calipers

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

- Replacement cable anchor bolt for brakes - Includes nut and washer

- One-piece ABS resin body - Non-slip rubber surface - Boron spindle - 388g pair

• Galvanized steel inner wire • Standard 5mm S.I.S. housing • Front or Rear • Mountain or road

- Forged alloy body and cage - Chromoly spindle - Toe clip compatible - 391g pair - 9/16-inch spindle

- Forged alloy body and cage - Chromoly spindle - Toe clip compatible (clips included) - 504g pair - 9/16-inch spindle

Lightweight aluminum construction with a versatile riser bar design.

- Forged alloy body and cage - Polished chromoly spindle - Toe clip compatible - 300g pair

• Galvanized steel inner wire • PTFE lined brake housing • Front or Rear • Mountain or road

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm • For bikes with 26-inch wheels

- Complete cable kits for internal three speed hubs

- Aluminum pad holder with R55C4 pads

- Shimano 105 R7000 Series CS-HG700-11 cassette - Average weight: 379g - Combination: 11-13-15-17-19-21-23-25-27-30-34T

- Shimano 105 R7000 Series CS-R7000 11-speed cassette - Average weight: 284 g (11-28T), 304 g (11-30T), 320 g (11-32T), 269 g (12-25T) Combinations: - 11 – 28T: 11-12-13-14-15-17-19-21-23-25-28T - 11 – 30T: 11-12-13-14-15-17-19-21-24-27-30T - 11 – 32T: 11-12-13-14-16-18-20-22-25-28-32T - 12 – 25T: 12-13-14-15-16-17-18-19-21-23-25T

Shimano 105 FC-R7000 asymmetric 110 BCD chainrings for 2x11 drivetrains.

Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending. - Maximum cog size: 30t (SS) / 34t (GS) - Total capacity: 35t (SS) / 39t (GS) - Pulleys: 11t - Chain compatibility: HG-EV 11-speed/HG-X11 - Direct mount compatible

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

Shimano ST-EF500 shift/brake lever provide an ergonomic, integrated solution for both brake and shifting controls. - Optical gear display - Adjustable reach - 4-Finger lever, compatible with cantilever, roller, linear-pull, and mechanical disc brakes

- MODEL NO: CS-HG400-9 - SERIES: SHIMANO ALIVIO M4000 Series - Compatible chain: HG 9-speed - Speeds: 9-speed - Type: HG

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included

Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately

Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48 - For seattube angles between 66 - 69 degrees

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS