Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$49.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap

$59.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap

$4.99
$19.99
75% Off
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.

$104.00 - $125.00
The Bosch Purion is a minimalist on-board computer designed for anyone who wishes to focus on the most important information and prefers an uncluttered handlebar. The Purion displays the essentials and lets riders get all important information with a click of the thumb, while keeping hands on the handlebars. Five different riding modes provide just the right amount of assistance in every situation.
- Manages four levels of assist from Eco to Turbo, with an eMTB mode specially designed for the Performance Line CX Drive system
- Features include charging status, speed, riding mode, range, trip distance and total distance

$31.50
The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data.
- The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava
- A 1.52-inch display allowing for use without a smartphone
- The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption
- The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control
- The SmartphoneHub charges phones using the eBike battery
- Walk assistance function helps you push your eBike at speeds of up to 6 mph

$6.39
$7.99
20% Off
Get your computer dialed with the perfect magnet
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
- Universal crank magnets sized for your bike and sensor
- Compatible with all cadence sensors

$3.99 - $5.99
Keep your computer and sensors ready for every ride with replacement batteries
Key features:
- CR2032 battery is used for most Trek and Bontrager computers
- 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor
- LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

$59.99
$74.99
20% Off
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.

$59.99
$74.99
20% Off
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs.
• ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor
• ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone
• For use with many ANT+ and Bluetooth Smart wireless technology enabled devices
• Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery
• Works with Trek DuoTrap compatible bikes

$9.99
$34.99
71% Off
Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.

$23.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.

$87.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days.
- Telescoping Garmin mount features on-the-go tilt adjust to avoid glare.
- Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out.
- Capacity: 26oz (768 mL)
- Material: Plate: 6061-T6 Aluminum
- Cage: Nylon Composite Vee Cage
- Computer Mount: Nylon Composite
- Bottle: Lead free, BPA-Free and HDPE food safe certified bottle
- Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm
- Weight: 9.3oz (265g)

$39.95
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices.
- Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount
- Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series
- Material: aluminum / fiberglass composite
- Max load: 220g
- Weight: 40g (120mm) / 45g (150mm)
- Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

$19.99
Enjoy easy viewing with the Butler Out Front handlebar mount!
Out Front Mount for following models:
BC 1909 STS
BC 2209 STS
ROX 5.0
ROX 6.0
ROX 8
ROX 8.1
ROX 9
ROX 9.1
*Note: not for use with ROX 10.0

$184.99
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected).
- Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series
- Li-Ion type
- Capacity: 500 mAH |3.7Wh (± 2000km autonomy)
- Rated voltage: 7.4V
- Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately)
- Fixing small parts included
- Weight: 52g

$18.98
$39.99
53% Off
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters.
Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers.
- Bluetooth adapter for PCs to work with Rouvy
- Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers.
- Works with PC desktops and laptops.

$5.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705.
- Glass-filled nylon, stainless steel Torx T25 bolt
- Weight: 20g

$129.00
- Shift buttons mounted to the end of a bar plug
- Included wire connects to Blip Box
- Fits bars with 19 - 20.5mm inside diameter

$118.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.
- Limitless remote shifting positions for drop and aero bars
- Wired shift buttons can be positioned however the rider prefers
- Connect to Blip Box or drop bar eTap levers
- Compatible with SRAM RED eTap shift/brake controls

$17.00
- Use to keep Blips in place on handlebars
- Fits 31.8mm round portion of drop bar
- Clamp mounts directly to bar outside of tape zone
- Ideal for use with thumbs or index fingers while hands are on the tops
- Right and left specific, just like Blips
- Weight: 12 grams (for pair)
- Material: Polypropylene
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap

$22.00
External Blip mount for aero extensions and base bars
- 360 degree rotation for adjustment
- Aero use only to fit 22.2mm OD bar 65mm in length
- Fits all Zipp aero extensions and base bars
- Blips not included
- Weight: 57 grams for pair (does not include Blip)
- Material: Polypropylene + TPE
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap

$39.99
This mount integrates with your Quick-Release Aerobars by attaching directly to one of the aerobar handlebar clamps and provides and out-front section of bar for attaching computers or other accessories.
Benefits:
- Positions your computer for easy viewing in road or aero riding positions
- Stays attached to your bicycle when aerobars are removed
Details:
- Provides two mounting heights and 3 positions to fine tune your computer's position
- Integrates with the optional Water Bottle Mount, putting all your essentials at your fingertips
- Includes all necessary mounting hardware

$214.00
Your tires are the only thing connecting you to the road or trail, and having optimal tire pressure can have more impact on ride comfort than both frame and wheel choice combined. But finding the right tire pressure requires trial and error. TyreWiz for Moto is the first-of-its-kind tire pressure sensor for Zipp 3Zero Moto wheels and takes the guesswork out of finding that optimal tire pressure. Lightweight and durable, TyreWiz adds only 10 grams to your tires. With an IPX7 waterproof and dustproof rating, you can confidently ride on any type of trail and know that your tire pressure sensor will keep going strong. TyreWiz reports data with +/-2% accuracy at a resolution of .1 PSI; vastly more accurate than any tire pump on the market. TyreWiz monitors the air pressure in real-time and relays the data to a cycling computer or a smartphone. That information is relayed to the SRAM AXS app and delivers personalized recommendations and pressure alerts. TyreWiz gives riders access to highly accurate, real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort.
Features
- Data reported with +/- 2% accuracy at .1 PSI resolution.
- Only compatible with Zipp 3ZERO Moto wheels.
- Inexpensive, user-replaceable CR1632 battery lasts for 300 hours.
- IPX7 dustproof/waterproof rating.

$408.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. Lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style.
ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed and terrain.
With ShockWiz, you know exactly how your suspension is performing – and how to make it better.
The Direct Mount version is for inverted forks such as the RockShox RS-1.
Features & Benefits:
- Automated tuning recommendations.
- Shock tuning score - a snapshot of how well your suspension is set up for you.
- Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill.
- Inexpensive, replaceable CR2032 battery lasts for months.
- Waterproof and dustproof - IP67 rating.
- Two alternative hoses (included) offer a range of fitting options.
- Smartphone app is compatible with Apple and Android phones.
Essential Details:
- ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use.
- You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive.
- Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app.
- In the box: ShockWiz hardware, two hoses, adapter for conventional forks and rear shocks, rubber mounting boot and zip ties.

$12.00
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

$7.49
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments.
- Lightweight alloy headset spacer with nylon body (9g)
- Compatible only with Shimano Di2 Junction Box
- 95mm length, 44mm width, 6mm height
- 6 Degree angle
Page 1 of 3
Next page